GPSBob Mongoose ADR Driver Tags Help &Troubleshooting Guide

What are ADR Tags and how do they work?

ADR (Automatic Driver Recognition) tags are small wireless
fobs used with your Mongoose vehicle tracker. They confirm that an authorised
driver is present when the vehicle is being used.

When your vehicle is started, the tracker searches for a
nearby ADR tag:

  • If a tag is detected → the driver is recognised
  • If no tag is detected → an alert or immobilisation may occur

These are commonly required for insurance-approved
tracking systems, helping protect your vehicle from theft and unauthorised
use.

Unauthorised Driving Alerts - Mongoose S5

These alerts occur when the vehicle is started or moved
without detecting your ADR tag.

To avoid this:

  • Always carry your ADR tag when driving
  • Ensure the tag is powered on and working
  • Keep the tag within range of the vehicle when in use.

Immobilisation - Mongoose S5+

To allow your vehicle to start:

  • Your ADR tag must be present before starting the vehicle
  • The system will detect the tag and automatically disarm the immobiliser

If the tag is not detected, the vehicle may remain
immobilised.

Which ADR Tag do you have

GPSBob Thatcham S5 & S5 Plus with TOTP Fob - GPSBob

ADR Tag V1

Battery: CR2450

Using your tag

The V1 tag includes an LED to show its status

Press the button three times to turn the tag on or
off:

  • 3 quick flashes = ON
  • 1 long flash = OFF

No LED lights when pressing the button?

  • Check the power status of the tag
  • Your tag may need to be reprogrammed

ADR Tag V2

Battery: CR3032

Using your tag

The V2 tag includes an LED indicator.

Press and hold the button to turn the tag on or off:

  • 3 quick flashes = ON
  • 1 long flash = OFF

No LED lights when pressing the button?

The battery may need replacing



ADR Tag V3

Battery: CR2032

Using your tag

The V3 tag is always powered on and does not need to
be switched on or off.

An LED on the front shows the tag’s status.

Press and hold the button to check:

  • 3 blinks = Tag is working correctly
  • No blinks = Check or replace the battery

No LED when pressing and holding the button?

  • The battery may need replacing